What is the difference between a squirrel cage motor and a wound-rotor (slipring) induction motor?

Monday - 13/08/2018 18:17
In a squirrel cage induction motor, the rotor has conductive bars embedded in slots in the laminations, running the length of the rotor.
What is the difference between a squirrel cage motor and a wound rotor (slipring) induction motor?
What is the difference between a squirrel cage motor and a wound rotor (slipring) induction motor?
These bars are shorted at each end with shorting rings.  There is no electrical connection between these bars and the motor terminal box.  The current in the rotor bars is a function of the motor slip, and we have no direct control over it.

In a wound rotor induction motor, the rotor is wound as a 3-phase winding with magnet wire, the ends of which are brought out to three slip rings mounted on the motor shaft.  Spring loaded brushes connect to these slip rings and in turn are connected to the motor terminal box.
Electric Motor

We can control the current induced in the rotor winding by using external resistors in the rotor circuit.  This has the advantage of reducing starting current and increasing starting torque.  Once the motor is up to speed, the external resistors are shorted out and the motor now has operating characteristics similar to those of a squirrel cage motor.

However wound motors are expensive and the brush gear requires regular maintenance.  There are other methods of improving starting characteristics of squirrel cage motors including electronic reduced voltage starters and VSDs.  So wound rotor motors are very rare these days.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article

  Reader Comments

Security Code   
online
  • Support

    Sales Manager

    +(84)923.886.133

    dolin@dolin.com.vn

    Sales 01

    +(84)918.26.11.44

    dolinvn@dolin.com.vn

    Sales 02

    +(84)941.976.189

    info@dolin.com.vn

    Sales 03

    +(84)923.886.191

    sales@dolin.com.vn

    Sales 04

    +(84)949.380.913

    dolinsales@dolin.com.vn

    Sales 05:

    +(84)987.246.757

    dolin@dolin.com.vn

Google+
Bestsellers
Software
CNC Machine
Construction and Land
Counter
  • Online29
  • Search engine2
  • Guest27
  • Today1,093
  • This month317,976
  • Total8,945,678
You did not use the site, Click here to remain logged. Timeout: 60 second